+- Scense (http://www.scense.com/forum)
+-- Forum: Scense User Group (http://www.scense.com/forum/forumdisplay.php?fid=1)
+--- Forum: Help & Troubleshooting (http://www.scense.com/forum/forumdisplay.php?fid=5)
+--- Thread: Action based on registry change (/showthread.php?tid=82)
Action based on registry change - Menno - 10-22-2015
Hi,
I want to know if its possible for a Scense action to be based on a registry change.
Case (simplified):
I use Scense client on vmware view VDI desktops
multiple locations all have different/unique subnets
so user logs logs on location 1 -> gets printer from location 1
user logs in on location 2 -> gets printer from location 2
this action is based on the locations build in Scense where the actual location comes from registry setting being inserted by the vmware view agent.
the "ViewClient_IP_Address" is the ip address of the actual zero client used by the user.
If a user switches from location 1 to location 2 and does NOT log out and in, but takes over the session, the "ViewClient_IP_Address" in the registry changes immediately.
At that point i want an action that changes the printer from "printer1" to "printer2"
Any ideas how to do this?
Thnx!
RE: Action based on registry change - Richard - 10-22-2015
Hi Menno,
You should take a look at the 'Active Location monitoring' article on ScenseGuru.com:
http://scenseguru.com/2015/08/28/active-location-monitoring-in-scense-10/
Although this article describes experimental functionality, it just might help you out.
Richard
RE: Action based on registry change - Menno - 10-22-2015
Hi Richard,
This post on ScenseGURU looks promising. Im gonna give it a shot...
thnx!